Any further information you want please click www.klean-esp.com or send an inquiry to kleanesp@klean-esp.com
Our 2016 series of industrial is specially designed for handing fume from dyeing and finishing. Some types of textile fume contain much wax and batt which would easily block the filter cells.
This machines is now service in Chinese Market, after months operational observation, we will put it into the international market.
ESP in below picture is a test unit for a cotton production line in 2014,the surface of filter cells covered with wax.
Features of our industrial ESP in 2016:
1. Spraying water system: cool the hot fume and filter the larger particulates.
2. Steam cleaning: using high-temperature vapor to clean the filter cells automatically.
3. Filter cells are put in Vertical direction which make collected grease easily self-drain down to the bottom.
4. Cathode needle is fixed at both ends in order to prevent cathode needle deviating from the center of the anode tube, and linear cathode needles ensure the filter cleaning cycle is extended by 3-6 times longer than that in the domestic industry.
From the below picture, this filter cells have been used for about 3 month without cleaning, you can see oil covers the tube but there is no grease deposits inside the tube.
Case for you to study our auto-cleaning device
Here is a textile factory which installed our 2016 series ESP. This factory is producing insulation material, the fume from this process is very complicated because of the thick wax.
1.The collected wax and grease:
2.ESP installed on site:
3.In this factory, filter cells are cleaned automatically once every 8 hours, pls compare the filter cells before and after auto cleaning from following photos.
Even though ESP is equipped with auto-cleaning device, we suggest our client manually clean the filter cells once or twice a year, because except the filter cells, other components would become dirty after long-time usage.
Even though ESP is equipped with auto-cleaning device, we suggest our client manually clean the filter cells once or twice a year, because except the filter cells, other components would become dirty after long-time usage.
Structure Introduction
Front View:
Rear View:
Function Description
1.Main Control Box:Centralized Control for the whole ESP unit
2.Front Electrical Box:With high-voltage power supply inside
3.Drainage Outlet:Discharge the grease collected by filter cell and sewage produced during the auto-cleaning of filter cell
4.Oil Pump:For collected waste oil drainage
5.Access Door of Buffer Box:For cleaning of inner side of buffer box
6.Access Door of Filter:For filter Maintenance
7.Filter Cell:For particulates capture
8.Temperature Sensor:Detect temperature inside ESP
9.Auto-cleaning & Fire-prevention system:Steam valves & water pipes
10.Switching Damper:Stop exhaust entering ESP when steam cleaning is working and fire-prevention system is activated
11.Awning:Prevent electrical box from rainwater and sunshine
12.Bottom Buffer Box:Buffer zone for exhaust
13.Top Buffer Box:Collect exhaust treated by ESP and lead it into air duct
Any further information you want please click www.klean-esp.com or send an inquiry to kleanesp@klean-esp.com
